How to Clean Bathroom Exhaust Fan with Light: Got a long list of house chores? Well, you can add cleaning an exhaust fan in it as well! Several individuals put off or delay this task however keeping a clean exhaust fan is extremely vital.
Exhaust fans can help reduce the bad odor of washrooms, they also get rid of the moisture in the air, and most importantly proper ventilation of the household takes place because of exhaust fans.
Ultimately the light helps keep the washroom bright and if you’re a makeup fan then the bathroom light is your go-to place.
Now imagine that if your exhaust fan is broken or the light is dirty then you’ll have a lot of trouble using the washroom. To tell you the truth, if you don’t clean the exhaust fan often then you’ll find spider webs on them after a certain period.
Hence we recommend that you clean the exhaust fans after every 5-6 months.
That’s a long time…so why put off the cleaning of the exhaust fan?
You’ll be surprised to know that it’s a very straightforward procedure and won’t take more than 15 minutes.
Let’s get started!
- 1 10 Simple Steps to Clean a Bathroom Exhaust Fan with Light
- 1.1 Step 1: Turn off the Electricity Connection from the Circuit Breaker
- 1.2 Step 2: Take out the Light and Light Cover
- 1.3 Step 3: Remove the Exhaust Fan Vent Cover
- 1.4 Step 4: Get a Soap and Sponge Ready for the Vent and Light Cover
- 1.5 Step 5: Dry the Cover
- 1.6 Step 6: Clean the Dust on the Exhaust Fan
- 1.7 Step 7: Wipe off the Grime
- 1.8 Step 8: Make an Extra Effort for Some Deep Cleaning
- 1.9 Step 9: Put All the Parts of the Exhaust Fan Together
- 1.10 Step 10: Turn the Power Back On
10 Simple Steps to Clean a Bathroom Exhaust Fan with Light
Step 1: Turn off the Electricity Connection from the Circuit Breaker
The first easiest option is that you unplug the two-prong plug that turns on the fan.
The second option is that if you have labeled every switch in the main circuit breaker then simply turn off the bathroom switch. If not then simply cut off the Electricity power of the house.
This step is a safety precaution so that no one gets injured in the cleaning process of the exhaust fan
Step 2: Take out the Light and Light Cover
You would want to remove the light cover first. If it is screwed to the wall then unscrew it and pull down the cover. Now take out the light bulb.
Step 3: Remove the Exhaust Fan Vent Cover
Pull down the exhaust fan cover towards yourself. Do this process very carefully and gently so that you don’t damage or break the vent cover.
The metal wiring would be on both sides of the exhaust fan. Put them on a side by sliding them out of their fixed places.
You would now have a full view of the exhaust fan. Can you see all the dust? Your target should be to get rid of all that dirt!
Step 4: Get a Soap and Sponge Ready for the Vent and Light Cover
First, make some soapy water in your bathroom sink. You can also use your bathing tub if you do not wish to use the sink. Fill the tub or sink with water and add in a few drops of dishwashing soap.
Get a sponge ready too! We recommend that you use a soft sponge rather than a hard textured one. If you don’t have a sponge then you can also opt for a cloth or towel. Just be very gentle while scrubbing the vent cover and light cover.
If you’re too harsh and scrub hard, you can risk taking off the paint of the vent cover.
Step 5: Dry the Cover
Place a towel on the floor or table.
After washing the vent cover; put it on the towel and allow it dry. If you have placed the towel in the bedroom then you can always turn on the fan so that the vent cover dries quickly.
Step 6: Clean the Dust on the Exhaust Fan
For this, you must first fetch a vacuum as getting rid of the dirt would be less time-consuming. Also, keep a spare toothbrush in your hand.
If the wire of the vacuum is small then get an extension and plug the vacuum in it. Vacuum the fan motor and housing.
For the smaller components use a toothbrush brush so every part of the exhaust fan is cleaned properly.
Step 7: Wipe off the Grime
When you have vacuumed the exhaust fan, you’ll notice that there is still some grime left. Take a towel and dip it in soapy water to clean the Grime.
Step 8: Make an Extra Effort for Some Deep Cleaning
While you’re already in the process of scrubbing and washing the bathroom exhaust fan, why not go the extra mile to clean the fan?
Keep a screwdriver and any nuts that you can locate on the fan, unscrew those. Start wiping all the exhaust fan parts with a towel and soapy water.
If you can remove the motor from the fan housing then do that so you can do some proper scrubbing of the exhaust fan. Don’t forget the fan blades! Wipe them with a damp cloth.
Step 9: Put All the Parts of the Exhaust Fan Together
If you removed any items from the exhaust fan, screw them back! Place the vent cover back on the Exhaust Fan and slide the wires back into their place.
Fix the light and its cover too.
Step 10: Turn the Power Back On
Once you have reassembled the exhaust fan, plug the plug-on of the fan back into the switch. If you turned off the main bathroom power from the main circuit breaker then turn that back on as well.
The Bathroom Exhaust Fan is As Good As New
Now, don’t you feel much better that your washroom exhaust fan is all clean? The light is shining brighter too isn’t it?
You’ll notice that the exhaust fan would be working a lot smoother than usual too. That is why don’t forget to clean from time to time!